TOOLS & REFERENCE


Building Worksheet for Fabrication Project

PLEASE SUBMIT THE FOLLOWING WORKSHEET FOR YOUR BUILDING PROJECT
  • Geographical Information

    CITY, STATE and NEAREST LARGE CITY are important because location may control code to be used for design. UV inhibitor is standard. UV coating may be specified for added protection. Many of our competitors do not have coating as an option. When bidding in a competitive situation, consider the extra cost.

    (Extending 1/2 mile or more from site in any Quadrant)
  • Design Conditions and Loads

    Building codes may vary by locality. The IBC (International Building Code) is becoming the standard, however, other applicable building codes may be BOCA, SBC, ANSI (now ASCE-7) or a local (city or state) building code. All design information can be easily obtained except local building code information. FLOOR LIVE LOAD is only required if the building has additional internal floors, platforms or mezzanines that tie to the structure. For buildings on concrete slabs, this is not applicable unless the platforms are to be quoted. Use the PLATFORM WORKSHEET if required. SEISMIC DESIGN CATEGORY is to be designated. If unknown, design will default to ASCE-7. Local conditions may govern in mountain regions, the west coast through the Rocky Mountain states and the East coast, North of Massachusetts.
  • Enter “n/a” if not available.
  • Enter “n/a” if not available.
  • Enter “n/a” if not available.
  • For mezzanines, platforms if applicable. Enter “n/a” if not available.
  • If unknown, design will default to ASCE-7 Enter “n/a” if not available.
  • Local Conditions May Control Enter “n/a” if not available.
  • Service and Quoting Requirements

    CORROSIVES AND TEMPERATURE may dictate EXTREN® requirements. EXTREN® SERIES may be specified. STANDARD COLOR or OTHER color is needed. HARDWARE will be bolts for structurals, grating clips and bolts, etc. SPECIFY as necessary.
  • (°F for Ambient)
  • HARDWARE REQUIRED

  • USE DRAWING BELOW FOR REFERENCE

  • Schematic for Building Dimensions
  • Additional Notes and File Attachments

    Information to Show: Plan view of platform (Width, Length, Etc.); Height above floor and/or grade; Handrails shown in plans as obstructions/interferences; Location of concentrated loads; Type of grating (if known), etc.
  • Please add any additional notes below:
  • Attach Files:

    For a firm price, submit drawings with this worksheet. Attach up to 4 PDF, JPG, GIF, or DWG files. Total size of attachments should not exceed 4 MB. The larger the files, the longer the form will take to complete. If larger files are necessary for the worksheet, make note of it in the additional note field and a Strongwell representative will contact you to receive the files.